Technotech Enterprises
Kodiyar Nagar, Surat, Gujarat
GST No. 24ABKPS9428H1Z7
TrustSEAL Verified
Call 0804898203267% Response Rate
SEND EMAIL
Product Details:
| Blade Material | Cast Iron |
| Capacity(Air Volume) | 150000 C.M.H |
| Usage/Application | Industrial |
| Impeller Size | 300 mm to 1600 mm |
| Brand | Technotech |
Axial Flow Fans are specially designed and manufactured for optimum relation between air quantity and power consumption and to meet the exact demands of commercial and industrial ventilation in hot, humid, dusty and corrosive environments.
Construction :
The Cylindrical casing of fans is fabricated from mild steel plates or Stainless Steel with adequate size for fine clearances as is practicable for better efficiency and fitted with Flanges on both the ends. Foot mounting arrangements to facilitate installation of the fan, on the ground of frame look.
Impeller :
The impeller of axial flow fan is made of cast in aluminium alloy and dynamically balanced and aerofoil of blade is designed to have maximum efficiency at lesser motor Power.
Motors :
The standard make A.C motors are totally enclosed squirrel cage induction type suitable for ambient temperature up to 40° C. Flame proofs ( IIA/IIB/IIC) , vapor tight, Class F, Class H and other motors can also be supplied on request.
Bearing :
Ball or Ball and roller bearings are fitted as standard.
Driving Arrangements :
There are two types of drives – The direct drive arrangement or V – Belt drive arrangement.
The direct drive arrangement, impeller and motor are both housed inside the casing and impeller is directly mounted or motor shaft.
V. Belt Arrangement – The impeller mounted on a separate shaft supported on two ball bearings and Plummer blocks inside casing. The motor is mounted on outer ring of the casing and shaft is driven with V- Belts.
Hot Air & Gas Application :
Fan is suitable for air and gas up to temperature of 65° C. or Between 65° C and 150° C the fans are made up of V – Belt drive arrangement and are equipped with special high temperature lubricated ball bearings.
Technical specification
Available 4,6,7,8 & 11 Blades Impeller
Available with Fixed & Variable Pitches Impeller
Larger sizes also available on demand.
Salient Features:
Cost effective
Large air volumes
Low power consumption
Easy to install
Low maintenance
Can be connected to Duct
Extra Features on Request
Available in Direct Drive & V-Belt Drive
Long and short casing
F.R.P/rubber lined for corrosive area
Gravity Louver/Bird Guard (Front/Back)
Special Paint Finish
Motor Class ( FLP With IIA,IIB IIC or Class F, Class H ect.)
Any Special stand
Product Details:
| Fan Speed | 1650 RPM |
| Voltage | 220 V |
| Frequency | 50/60 Hz |
| Usage/Application | Industrial |
| Brand | Technotech |
Axial flow fans are specially designed and manufactured for optimum relation between air quantity and power consumption and to meet the exact demands of commercial and industrial ventilation in hot, humid, dusty and corrosive environments.
Construction :
The cylindrical casing of fans is fabricated from mild steel plates or stainless steel with adequate size for fine clearances as is practicable for better efficiency and fitted with flanges on both the ends. Foot mounting arrangements to facilitate installation of the fan, on the ground of frame look.
Impeller :
The impeller of axial flow fan is made of cast in aluminum alloy and dynamically balanced and aero foil of blade is designed to have maximum efficiency at lesser motor Power.
Motors :
The standard make A.C motors are totally enclosed squirrel cage induction type suitable for ambient temperature up to 40° C. Flame proofs ( IIA/IIB/IIC) , vapor tight, Class F, Class H and other motors can also be supplied on request.
Bearing :
Ball or Ball and roller bearings are fitted as standard.
Driving Arrangements :
There are two types of drives – The direct drive arrangement or V – Belt drive arrangement.
The direct drive arrangement, impeller and motor are both housed inside the casing and impeller is directly mounted or motor shaft.
V. Belt Arrangement – The impeller mounted on a separate shaft supported on two ball bearings and Plummer blocks inside casing. The motor is mounted on outer ring of the casing and shaft is driven with V- Belts.
Hot Air & Gas Application :
Fan is suitable for air and gas up to temperature of 65° C. or Between 65° C and 150° C the fans are made up of V – Belt drive arrangement and are equipped with special high temperature lubricated ball bearings.
Technical specification
Air Volume up to 150000 C.M.H
Sizes from 300 mm to 1600 mm.*
Available 4,6,7,8 & 11 Blades Impeller
Available with Fixed & Variable Pitches Impeller
Larger sizes also available on demand.
Salient Features:
Cost effective
Large air volumes
Low power consumption
Easy to install
Low maintenance
Can be connected to Duct
Extra Features on Request
Available in Direct Drive & V-Belt Drive
Long and short casing
F.R.P/rubber lined for corrosive area
Gravity Louver/Bird Guard (Front/Back)
Special Paint Finish
Motor Class ( FLP With IIA, IIB IIC or Class F, Class H ect.)
Any Special stand
Product Details:
| Minimum Order Quantity | 1 Piece |
| Usage/Application | Industrial |
| Size | 300 mm to 1600 mm. |
| Brand | Technotech |
| Air Volume | 150000 C.M.H |
| Blades Impeller | 4,6,7,8 & 11 |
Axial Flow Fans are specially designed and manufactured for optimum relation between air quantity and power consumption and to meet the exact demands of commercial and industrial ventilation in hot, humid, dusty and corrosive environments.
Construction :
The Cylindrical casing of fans is fabricated from mild steel plates or Stainless Steel with adequate size for fine clearances as is practicable for better efficiency and fitted with Flanges on both the ends. Foot mounting arrangements to facilitate installation of the fan, on the ground of frame look.
Impeller :
The impeller of axial flow fan is made of cast in aluminium alloy and dynamically balanced and aerofoil of blade is designed to have maximum efficiency at lesser motor Power.
Motors :
The standard make A.C motors are totally enclosed squirrel cage induction type suitable for ambient temperature up to 40° C. Flame proofs ( IIA/IIB/IIC) , vapor tight, Class F, Class H and other motors can also be supplied on request.
Bearing :
Ball or Ball and roller bearings are fitted as standard.
Driving Arrangements :
There are two types of drives – The direct drive arrangement or V – Belt drive arrangement.
The direct drive arrangement, impeller and motor are both housed inside the casing and impeller is directly mounted or motor shaft.
V. Belt Arrangement – The impeller mounted on a separate shaft supported on two ball bearings and Plummer blocks inside casing. The motor is mounted on outer ring of the casing and shaft is driven with V- Belts.
Hot Air & Gas Application :
Fan is suitable for air and gas up to temperature of 65° C. or Between 65° C and 150° C the fans are made up of V – Belt drive arrangement and are equipped with special high temperature lubricated ball bearings.
Technical specification:
Available with Fixed & Variable Pitches Impeller
Larger sizes also available on demand.
Salient Features:
Cost effective
Large air volumes
Low power consumption
Easy to install
Low maintenance
Can be connected to Duct
Extra Features on Request
Available in Direct Drive & V-Belt Drive
Long and short casing
F.R.P/rubber lined for corrosive area
Gravity Louver/Bird Guard (Front/Back)
Special Paint Finish
Motor Class ( FLP With IIA,IIB IIC or Class F, Class H ect.)
Any Special stand
Product Details:
| Impeller Size | 300 mm to 1600 mm |
| Capacity(Air Volume) | 150000 C.M.H |
| Electric Current Type | AC |
| Blades Impeller | 4,6,7,8 & 11 |
Axial Flow Fans are specially designed and manufactured for optimum relation between air quantity and power consumption and to meet the exact demands of commercial and industrial ventilation in hot, humid, dusty and corrosive environments.
Construction :
The Cylindrical casing of fans is fabricated from mild steel plates or Stainless Steel with adequate size for fine clearances as is practicable for better efficiency and fitted with Flanges on both the ends. Foot mounting arrangements to facilitate installation of the fan, on the ground of frame look.
Impeller :
The impeller of axial flow fan is made of cast in aluminium alloy and dynamically balanced and aerofoil of blade is designed to have maximum efficiency at lesser motor Power.
Motors :
The standard make A.C motors are totally enclosed squirrel cage induction type suitable for ambient temperature up to 40° C. Flame proofs ( IIA/IIB/IIC) , vapor tight, Class F, Class H and other motors can also be supplied on request.
Bearing :
Ball or Ball and roller bearings are fitted as standard.
Driving Arrangements :
There are two types of drives – The direct drive arrangement or V – Belt drive arrangement.
The direct drive arrangement, impeller and motor are both housed inside the casing and impeller is directly mounted or motor shaft.
V. Belt Arrangement – The impeller mounted on a separate shaft supported on two ball bearings and Plummer blocks inside casing. The motor is mounted on outer ring of the casing and shaft is driven with V- Belts.
Hot Air & Gas Application :
Fan is suitable for air and gas up to temperature of 65° C. or Between 65° C and 150° C the fans are made up of V – Belt drive arrangement and are equipped with special high temperature lubricated ball bearings.
Technical specification
Available with Fixed & Variable Pitches Impeller
Larger sizes also available on demand.
Salient Features:
Cost effective
Large air volumes
Low power consumption
Easy to install
Low maintenance
Can be connected to Duct
Extra Features on Request
Available in Direct Drive & V-Belt Drive
Long and short casing
F.R.P/rubber lined for corrosive area
Gravity Louver/Bird Guard (Front/Back)
Special Paint Finish
Motor Class ( FLP With IIA,IIB IIC or Class F, Class H ect.)
Any Special stand
Product Details:
| Brand | Technotech |
| Sizes | 300 mm to 1600 mm. |
| Blades Impeller | Available 4,6,7,8 & 11 |
| Air Volume | up to 150000 C.M.H |
Axial Flow Fans are specially designed and manufactured for optimum relation between air quantity and power consumption and to meet the exact demands of commercial and industrial ventilation in hot, humid, dusty and corrosive environments.
Construction :
The Cylindrical casing of fans is fabricated from mild steel plates or Stainless Steel with adequate size for fine clearances as is practicable for better efficiency and fitted with Flanges on both the ends. Foot mounting arrangements to facilitate installation of the fan, on the ground of frame look.
Impeller :
The impeller of axial flow fan is made of cast in aluminium alloy and dynamically balanced and aerofoil of blade is designed to have maximum efficiency at lesser motor Power.
Motors :
The standard make A.C motors are totally enclosed squirrel cage induction type suitable for ambient temperature up to 40° C. Flame proofs ( IIA/IIB/IIC) , vapor tight, Class F, Class H and other motors can also be supplied on request.
Bearing :
Ball or Ball and roller bearings are fitted as standard.
Driving Arrangements :
There are two types of drives – The direct drive arrangement or V – Belt drive arrangement.
The direct drive arrangement, impeller and motor are both housed inside the casing and impeller is directly mounted or motor shaft.
V. Belt Arrangement – The impeller mounted on a separate shaft supported on two ball bearings and Plummer blocks inside casing. The motor is mounted on outer ring of the casing and shaft is driven with V- Belts.
Hot Air & Gas Application :
Fan is suitable for air and gas up to temperature of 65° C. or Between 65° C and 150° C the fans are made up of V – Belt drive arrangement and are equipped with special high temperature lubricated ball bearings.
Technical specification
Air Volume up to 150000 C.M.H
Sizes from 300 mm to 1600 mm.*
Available 4,6,7,8 & 11 Blades Impeller
Available with Fixed & Variable Pitches Impeller
Larger sizes also available on demand.
Salient Features:
Cost effective
Large air volumes
Low power consumption
Easy to install
Low maintenance
Can be connected to Duct
Extra Features on Request
Available in Direct Drive & V-Belt Drive
Long and short casing
F.R.P/rubber lined for corrosive area
Gravity Louver/Bird Guard (Front/Back)
Special Paint Finish
Motor Class ( FLP With IIA,IIB IIC or Class F, Class H ect.)
Any Special stand
Product Details:
| Usage/Application | Industrial |
| Material | Cast Iron |
| Voltage | 220 V |
| Brand | Technotech |
| Capacity | 150000 C.M.H |
Axial Flow Fans are specially designed and manufactured for optimum relation between air quantity and power consumption and to meet the exact demands of commercial and industrial ventilation in hot, humid, dusty and corrosive environments.
Construction :
The Cylindrical casing of fans is fabricated from mild steel plates or Stainless Steel with adequate size for fine clearances as is practicable for better efficiency and fitted with Flanges on both the ends. Foot mounting arrangements to facilitate installation of the fan, on the ground of frame look.
Impeller :
The impeller of axial flow fan is made of cast in aluminium alloy and dynamically balanced and aerofoil of blade is designed to have maximum efficiency at lesser motor Power.
Motors :
The standard make A.C motors are totally enclosed squirrel cage induction type suitable for ambient temperature up to 40° C. Flame proofs ( IIA/IIB/IIC) , vapor tight, Class F, Class H and other motors can also be supplied on request.
Bearing :
Ball or Ball and roller bearings are fitted as standard.
Driving Arrangements :
There are two types of drives – The direct drive arrangement or V – Belt drive arrangement.
The direct drive arrangement, impeller and motor are both housed inside the casing and impeller is directly mounted or motor shaft.
V. Belt Arrangement – The impeller mounted on a separate shaft supported on two ball bearings and Plummer blocks inside casing. The motor is mounted on outer ring of the casing and shaft is driven with V- Belts.
Hot Air & Gas Application :
Fan is suitable for air and gas up to temperature of 65° C. or Between 65° C and 150° C the fans are made up of V – Belt drive arrangement and are equipped with special high temperature lubricated ball bearings.
Technical specification
Air Volume up to 150000 C.M.H
Sizes from 300 mm to 1600 mm.*
Available 4,6,7,8 & 11 Blades Impeller
Available with Fixed & Variable Pitches Impeller
Larger sizes also available on demand.
Salient Features:
Cost effective
Large air volumes
Low power consumption
Easy to install
Low maintenance
Can be connected to Duct
Extra Features on Request
Available in Direct Drive & V-Belt Drive
Long and short casing
F.R.P/rubber lined for corrosive area
Gravity Louver/Bird Guard (Front/Back)
Special Paint Finish
Motor Class ( FLP With IIA,IIB IIC or Class F, Class H ect.)
Any Special stand